AK Sponsor
Posted: 12/3/2006 11:13:56 AM EDT
|
Does anyone have Romy underfolder instructions for the folding stock? I referenced the following yugo parts instructions but the parts don't seem to exactly match up. http://home.earthlink.net/~mwsjb/AKbuild3.htm What it looks like to me from this webpage is that part #6 (locking lug) is not included, part #8 (external locking lug) does not include the shaft, and that part #7 (locking nut) goes outside of part #8 (external locking lug). Does this sound right? First attempt at an AK build. Thanks for the help!!! ETA: This is a MD63 kit. thanks |
|
Your correct, the Romy will not have part Number 8. 1. Position folder onto the receiver. 2. 2. Slide the sling swivel (5) onto the center support pin (3). Put locking lug (6) in the receiver with it's lugs pointing to the left side of the receiver so the center pin will slide through it. From the left, slide the center pin through the folder making sure it also slides through the locking lug. 3. Skip 4. Insert one of the pins (4), through the center support making sure it is also going through the slot on the shaft of the external lug. Try all three pins until you find the one that fits best. You want an equal amount of pin sticking out each side. 5. Grab the sling swivel and turn and push the center support until the pin you just installed slides into the cut outs in the trunion. This pin keeps the whole locking assembly from rotating. 6. Screw the locking nut onto the threads of the center support until it fits snug. Skip ahead 9. Insert the push button spring (2) into the left side of the center support. Do the second pin here happy with the function ? Set locking nut onto the threads of the center support with the last pin. |
AK Sponsor