Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 3/31/2006 9:00:24 AM EDT
[Last Edit: 4/2/2006 5:44:28 PM EDT by phatmax]
I finally swabbed the hell out of my UF kit bore and the chamber actually appears to be chromed, however the rifling does NOT have sharp, defined edges on the lands. The muzzle rifling seems a bit pitted from the Yugo ammo (GD GD GD GD). How is this going to affect my rifles ability to shoot?

Also, does anyone out there have a source for new Yugo barrels or ones that might work?
Link Posted: 3/31/2006 6:29:28 PM EDT
Sorry no chrome lined barrels on yugos. CFS had new barrels a couple of weeks ago. Also it should still shoot fine.
Link Posted: 3/31/2006 6:57:13 PM EDT
My barrel was pretty bad, but she shoots better than any of my shiney barrel Rommies

Link Posted: 4/1/2006 1:49:09 AM EDT
freefalle7 What ammo are you using. I have tiger and some cheeta. My Yugo seems to do better with the cheeta but my Polish UF likes the tiger.
Link Posted: 4/2/2006 10:54:04 AM EDT
Take the brake off the end and reverse a round into the muzzle. As long as the bullet stops before entering the muzzle all the way accuracy will likely be OK. However if you have serious erosion, like the bullet doesn't stop till you reach the casing neck, then she likely will widen up considerably after 25 yards.
Link Posted: 4/2/2006 5:13:43 PM EDT
[Last Edit: 4/2/2006 5:14:51 PM EDT by FREEFALLE7]
Cheap Wolf SP

freefalle7 What ammo are you using. I have tiger and some cheeta. My Yugo seems to do better with the cheeta but my Polish UF likes the tiger.

FREE
Link Posted: 4/2/2006 5:44:02 PM EDT
Oh and the date that is on my barrel trunnion is 1993, is that ACTUAL manufacture date?
Top Top