AK Sponsor
Posted: 3/18/2006 3:35:20 PM EDT
|
Okay, I'm building for the first time today. I've got the trunnion, rear trunnion, and trigger guard installed, and riveted. Just for the hell of it I put a mag in but it wont lock up. What should I look for? It sits all the way in the mag well but doesn't latch. I'm thinking the mag catch is too long? Anyway, thanks in advance! Matt 
|
|
I had the same problem on my first build. I fixed it by removing metal from (under the mag catch/triggerguard)the rear of the magwell. just remove a small bit at a time until she latches. I have had this happen even after I fitted the mag, all was good and loose untill I rivoted the trunion and then she tightened up. just file on the rear of the magwell until it fits. If this doesnt work then you could file the mag catch. I myself would only file the mag catch as a last resort IMO. Remember if you didnt do this, rivot the triggerguard first, fit the mag then rivot the front trunion. Do this and you should be fine. Good luck and post pics when she is done.  FREE |
AK Sponsor