Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 2/23/2006 1:01:40 AM EDT
I was thinking MAYBE putting a steel block on the inside of the receiver with the receiver in my vise sideways and hitting the rivet head with a hammer what do you think?

The vise would be under the steel block sorta holding the receiver up just a bit. if this wont work do you know any other ways i need some idea's im broke!
Link Posted: 2/23/2006 1:42:53 AM EDT
your squeezers won't reach? i have 36" bolt cutters and they reached the UF rivets w/no problem.

caspian
Link Posted: 2/23/2006 1:00:35 PM EDT
I used 2 U-drives per side for the short ones and a standered long rivet..
Link Posted: 2/25/2006 9:44:47 AM EDT
I use Harbor Freight 24" bolt cutters modfied and they have mashed the rivets in everything I have built to date. I paid $9.00 for them.
Link Posted: 2/25/2006 6:02:41 PM EDT

Originally Posted By FloridaAKM:
I use Harbor Freight 24" bolt cutters modfied and they have mashed the rivets in everything I have built to date. I paid $9.00 for them.



+1
Link Posted: 2/25/2006 7:11:40 PM EDT
24" bolt cutters work for me also
Link Posted: 2/25/2006 7:23:06 PM EDT
[Last Edit: 2/25/2006 7:23:26 PM EDT by tapeo1]
24" boltcutters will work for the lower rivets on an underfolder if you remove some metal from the jaws so they'll reach down there.
Top Top