Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 1/30/2006 9:04:12 PM EDT
Leaving out the dreaded 3rd hole and the little metal arm of course. What I am getting at is can I make a LEGAL semi auto using the original trigger parts that came with the parts kit or am I stuck shelling out the $34.00 for the G2?


OMP

Link Posted: 1/30/2006 9:29:49 PM EDT
Link Posted: 1/31/2006 6:14:49 AM EDT
i dont think you can use the trigger tho they hold the hammer to high.
Link Posted: 1/31/2006 6:18:00 AM EDT
So it wont be FA though correct? I have nosey neighbors and I dont want the alpahbet crew visiting me. What do you mean about the hammer being too high?



Thanks

Matt
Link Posted: 1/31/2006 6:53:36 AM EDT
I used the Hungarian fire control group on my pistol and it functions fine. I am not sure what the "hold the hammer too high" stuff is all about.
Link Posted: 1/31/2006 11:16:33 AM EDT
maybe it was just my sar, i tried a romey trigger trying to see if the grity feeling would go away and it held the hammer higher than the trigger it came with did, caused the carrier to bind up on the hammer.
Link Posted: 1/31/2006 11:18:42 AM EDT
Hmm going to be a trick figuring out how it goes back in though, doesn tlook the same as the SAR 3 I have sitting next to it. Any hints...?


OMP

Link Posted: 1/31/2006 5:16:09 PM EDT
[Last Edit: 1/31/2006 5:17:10 PM EDT by ozzy_the_nuke]
+1 on the semi auto trigger that came with some Hungarian 63 and 65 kits. They work very well when 922r compliance isnt an issue. Most other kits come with either a mismatched disconnector or a FA FCG that used a rate reducer. To make the latter work well, you need to put some kind of a spacer in to take up the space of the rate reducer. All things considered, the G2 is usually the best route.
Top Top