Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 1/24/2006 11:29:23 PM EDT
if not, where can I find a template?

Thanks in Advance

Tom
Link Posted: 1/25/2006 3:37:49 AM EDT
100% recievers from Nodak-Spudhave underfolder holes predrilled of course. None other I am aware of...as far as templates there are a lot online
Link Posted: 1/25/2006 4:39:26 AM EDT
These guys have an 80% prebent blank with the UF holes.

www.coldsteelsolutionsincorporated.com/css,_inc_003.htm
Link Posted: 1/25/2006 8:41:49 AM EDT
AK-builder sells them, but they are out of stock right now.
I built 2 using them, they work nicely
Link Posted: 1/25/2006 9:12:46 AM EDT
I got a couple of flats for the Polish UF from
ak-builder.com/ak/index.php

They worked well. Check with Curtis.
Link Posted: 1/25/2006 3:33:19 PM EDT

Originally Posted By Cazador223:
if not, where can I find a template?

Thanks in Advance

Tom



As far as templates go, the underfolding trunion is your best template. It really isn't rocket science to drill out your own holes for an underfolder.
Link Posted: 1/25/2006 4:32:11 PM EDT
There is one on the EE right NOW! http://ak47.net/forums/topic.html?b=7&f=123&t=324677
Link Posted: 1/25/2006 6:30:47 PM EDT
[Last Edit: 1/25/2006 6:31:08 PM EDT by BSOG1]
im curious also. what tools do you guys use to make the holes and slots
for the rear underfolder.
do you just line the trunion up with the rear of the reciever??
i have a global rec.

thanks
Link Posted: 1/25/2006 8:53:10 PM EDT
Mack, Curtis is out of flats for the time being but will have some soon and that should fit my time frame anyway, thanks for the link.

Tapeo, I know it's not difficult but it is time consuming, when I got into this I had lots of free time but lately life in general is taking up most of my time.

Thanks for the replies

Tom
Top Top