AK Sponsor
Posted: 11/22/2005 1:53:49 PM EDT
|
apparently curtis at ak-builder is not including instructions with the plinker jig like he said he was. if anyone has a place where i can get instructions (preferably online, and not at the goons network because i can't access it anymore  ) i'd really appreciate it, so i don't have a $200 paperweight in my shop.
|
|
I believe I have most of the info that was on the CD on here: www.quarterbore.net/forums/showthread.php?t=161 I can look at my CD and confirm... I have to be honest I had a bugger of a time figuring out how to use the jig myself and I sort of did it my own way... You can see my pics on how I used the jig from here: www.quarterbore.net/forums/showthread.php?t=563 And specifically in this set of images: quarterbore.com/images/amdbuild4/ |
| Quarterbone I have a question for you. The link you posted above, the second picture down shows all 3 adapters with no threads. Then in the third picture down it shows the adapter with threads out of the back of the 1 1/2 bar. My question is are the adapters one piece or seprate. And on Adapter A the plans show a 3/8 drill and tap on the opposite side of the anvil but it is not shown on Adapter B. I was wondering what the hole was for? |
Wow... I am too limitited in brain power to explain this now... I will see if I can upload the diagrams from the real instructions and describe it from that... like I said above, I am not sure I know how I am really supposed to use the jig... But it worked well for me just the same! |
www.ak-builder.com/ak/modules.php?name=Content&pa=showpage&pid=16 |
|
Thanks FREE
|
AK Sponsor