[ARCHIVED THREAD] - Help please

Posted: 5/16/2005 3:25:49 PM EDT

Can anyone press out a barrel pin and barrel for me. I tore apart my Inter-ordnace krinks recv underfolder, ( the recv was so soft and bendable, you could actually twist it around with very little effort. so I trashed it) and was going to assemble back on a oow. Seeing as I rivet and fasten on the sly at my job (sheet metal mech) I can do all that, but I have a barrel in a trunion and need it removed, I cant go bopping into work with a rifle front end, so I need help. I can pay if thats whats needed. I will use dry ice and a big ol hammer to reinstall them.

Thanks for any info or help

(or is there some way to get it out without a press)???

Posted: 5/16/2005 3:35:04 PM EDT

[#1]

you can get it out with a big vice but if you wanna send it to me ill remove it for you you cover all shipping

Posted: 5/16/2005 3:52:30 PM EDT

[#2]

That would be appreciated. Ill get it sent, send me a addy and Ill drop it and a 20$ in a box and have it off to you soon.

Posted: 5/16/2005 4:10:19 PM EDT

[#3]

Hello.
If any one else needs help, I will gladly help. I bought 12ton press, and need to put it to work...

Good luck.

Posted: 5/16/2005 11:47:23 PM EDT

[#4]

Yep same here...

I also made a stubby push pin from a bolt for the first push...then a longer one for getting it the rest of the way. It's easy work with the press.

Posted: 5/17/2005 11:27:46 AM EDT

[#5]

the best push pin ive made is with a alenhead socket
you just turn down the alenhead in a drilldress with a file
its alot more stable than a bolt seems to be alot stronger also (altho i heated it red and quenched to harden )

[ARCHIVED THREAD] - Help please

AK Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Help please

[ARCHIVED THREAD] - Help please