AK Sponsor
Posted: 3/25/2003 1:24:17 PM EDT
|
I tried the search feature, but nothing turned up. I have ground down the rivet heads in an attempt to remove the rivets from the rear trunnion. Do I now need to drill them out, or should they be loose enough (they'er not)to tap out using a punch? This is my first AK 'thing', so any advise would be appreciated. Thanks Les |
|
i take a die grinder and abrasive/sandpaper disc the them to flush out the head. then, centerpunch them and use a 3/32" drill bit on the small rivets and a 1/8" drill bit on the large rivets to drill partially thru the rivet stem. a pin punch and hammer will rive them out from there. |
AK Sponsor