AK Sponsor
Posted: 9/17/2010 9:09:21 AM EDT
| Hi guys, need to thread my Intrac MK II barrel...whats the best place for the tools? I mic'd the barrel and its .502 so I would want to go with 14x1 LH threads is that correct? Anything to be extra careful of while doing this? Any input is appreciated! |
|
I bought mine from these guys.
http://preciseinnovationsllc.com/old%20pages/threadingkits.htm Take it slow and follow the instructions, use some type of oil while threading. I bought the whole kit which included the handle, TAT and cutting die for the 14x1 left handed thread. Used it on my SAR1 barrel with great success, I've since sold it, other wise I'd let you borrow it. Sorry. As far as the barrel diameter you now have, some one else will have to chime in. |
|
Quoted:
I bought mine from these guys. http://preciseinnovationsllc.com/old%20pages/threadingkits.htm Take it slow and follow the instructions, use some type of oil while threading. I bought the whole kit which included the handle, TAT and cutting die for the 14x1 left handed thread. Used it on my SAR1 barrel with great success, I've since sold it, other wise I'd let you borrow it. Sorry. As far as the barrel diameter you now have, some one else will have to chime in. I bought and used the same kit. While you can piece the parts together for cheaper, the convenience of getting it all in one place and getting exactly what you need are nice. Just follow the instructions, its very easy. |
AK Sponsor