[ARCHIVED THREAD] - How to lube trigger group

Posted: 2/28/2010 6:17:34 AM EDT

How do I lube that area? I have quibs chart, but do I need grease anywhere in there, or just oil?

(yeah, newbie

)

Posted: 2/28/2010 6:46:41 AM EDT

[#1]

Oil is just fine. I do use a touch of grease (tw25-b) on the "sear" surface, but it is not needed.

Posted: 2/28/2010 8:17:34 AM EDT

[#2]

Quoted:
Oil is just fine. I do use a touch of grease (tw25-b) on the "sear" surface, but it is not needed.

I use TWB-25 as well...runs great in THE desert.

Posted: 2/28/2010 8:37:38 AM EDT

[#3]

The only part that I routinely lube is the top of the hammer where it contacts the bottom of the bolt carrier.

Occasionally I'll put a few small drops on the trigger and hammer pins from the inside where they contact the springs, then cycle the action a few times to work it in.

Posted: 2/28/2010 10:35:08 AM EDT

[#4]

That's about what I do. I like my AR's wet so some some oil drips down into the FCG anyway.

[ARCHIVED THREAD] - How to lube trigger group

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - How to lube trigger group

[ARCHIVED THREAD] - How to lube trigger group