AR Sponsor
Posted: 9/27/2009 3:01:18 PM EDT
| I will be assembling my first AR 15 next week starting with the stripped lower and parts kit. I want to do everything right to prevent premature wear or failure. I know how to properly clean and oil firearms, but I am unclear of where exactly to use gun grease on an AR if it's needed. I read in a youtube post that "Moly" grease is recommended. Thanks in advance! |
|
The -23 manual says that moly grease should be used on the threads of the receiver extension. Moly grease is also required on the threads of the upper to prevent galling with the barrel nut when you install the barrel. Otherwise, a light coat of oil (CLP will do fine) on the trigger and hammer pivot points are all you need for a standard trigger. http://www.ar15.com/content/manuals/TM9-1005-319-23.pdf I use 3in1 oil on the roll pins during install to help with friction and make the install easier. It's not required, but it'll make your assembly easier. ETA: Welcome to the site! |
|
OK, I know this has probably been kicked around before, but..............I need more input. What type of grease and/or lubricant should be used on what parts of a AR-15 to keep it operating for the longest time frame with minimal wear? I think someone had mentioned that he used axle grease or something similar, but what is the best to use on what parts and HOW MUCH?? As usual, any and all input is greatly appreciated.
FR&G |
|
Quoted: OK, I know this has probably been kicked around before, but..............I need more input. What type of grease and/or lubricant should be used on what parts of a AR-15 to keep it operating for the longest time frame with minimal wear? I think someone had mentioned that he used axle grease or something similar, but what is the best to use on what parts and HOW MUCH?? As usual, any and all input is greatly appreciated. FR&G Start by reading the -10 manual for the AR platform for basic weapon maintenance and PMCS. http://www.ar15.com/content/manuals/TM9-1005-319-10.pdf Nothing more than CLP is required for the proper lubrication of the weapon. Some greases may be used, but grease does have its drawbacks as it tends to attract more debris and foul quickly. Here's some nice pics of lube points that Quib made up that answer "how much":    |
AR Sponsor