AR Sponsor
Posted: 8/14/2008 5:12:49 AM EDT
|
Picked up a Colt SP1 carbine maybe 8 years ago, shot it once and put it away. I got it out the other day to check it out and clean it. While running a brush through it about 6 to 7 inches from the end of the muzzle there seemed like there was a void or an easy pull through area, then on continued pulling the resistance started up again, checked the outside of the barrel for a bulge, no bulge! Looked inside and didn;t see anything , what could be the problem with the barrel? Thanks for any help ! |
|
If you do not see any obvious defects its hard to say. Remove the upper and shine a bright light into the chamber and inspect the bore.If the barrel is ringed you will see it as a dark ring area. Otherwise I'd say your GTG. If your still concerned,have a gunsmith eye ball the bore and see what he or she says. Make sure the bore is cleaned and lubed before you store it again though. |
You know any female gunsmiths  
|
AR Sponsor