[ARCHIVED THREAD] - cleaning under the free float

Posted: 7/1/2007 2:05:49 PM EDT

so does anyone have any clever ways of cleaning & lubing under a free float handgard?
i have a yankee hill.

Posted: 7/1/2007 2:22:18 PM EDT

[#1]

You could try spraying out underneath it with Break-Free Powder Blast or any other brand of spray weapons cleaner. Lubing might be trickier. Maybe spray some CLP then blow out the excess with compressed air.

Or, take a rag lightly soaked in CLP and slip it inbetween the barrel and HG’s. Then manover it around as best as possibly leaving behind a light coat of lube.

Posted: 7/1/2007 5:04:39 PM EDT

[#2]

Just leave the damn thing alone and shoot it.

Posted: 7/1/2007 5:30:39 PM EDT

[#3]

Use a dry spray lube. Maybe one that is a cleaner as well. Tetra, One-shot, Strike-Hold etc.

Don't listen to the leave it alone advice, unless you are in a very dry area, and never get it wet. Rust is usually considered a bad thing.

Posted: 7/2/2007 2:59:15 PM EDT

[#4]

Quoted:
Just leave the damn thing alone and shoot it.

Posted: 7/2/2007 11:13:34 PM EDT

[#5]

Quoted:
Just leave the damn thing alone and shoot it.

You would be surprised how much crud builds up under there.....it should be cleaned up once in a while.

[ARCHIVED THREAD] - cleaning under the free float

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - cleaning under the free float

[ARCHIVED THREAD] - cleaning under the free float