AR Sponsor
Posted: 4/14/2014 12:36:03 PM EDT
|
Just wanted to notify everyone that the magazine well on my Carbon 15 lower was miscut from the factory. If you have encountered failure to feed with your Carbon 15, you may have a defect and need to contact Bushmaster for a replacement lower. Feel free to read part of my correspondence with Bushmaster below. In summary,
- I took my new Carbon 15 out to the range for the first time and encountered feeding issues right off the bat. I tried three different brand magazines (1 steel Bushmaster, 1 steel Brownells and 1 plastic Pro Mag) and encountered the same feeding problem with all three. What I believe the problem to be is this: the magazine loading block is miscut. None of these 30-round mags seated snugly in the magazine well. Even when fully seated, they rocked forward and backward, which changed the angle of the ammo resulting in failure to feed. Serial#: CBC****** - Hope this information is of help to someone out there. |
|
I know in my time with Bushmaster I personally saw a few come back for warranty/repair/replacement. I think the carbons are a trade-off, you definitely lose reliability for the weight savings. Which, let's be honest, is pretty unacceptable for a firearm.
That being said, the quality control was very high at the plant, no one there was intentionally letting anything out the door that was less than perfect. |
| Thanks for the comment JW_Desert. For any inquiring minds out there, Bushmaster returned my C15 with a brand new lower on it. I took it out and it fed at least 100 rounds with no hiccups using the same magazines as I had tried before. I noticed all 3 mags snapped right into place and didn't budge so that confirmed the problem. |
AR Sponsor