AR Sponsor
Posted: 2/9/2013 10:01:44 AM EDT
|
Fried first round, bolt stuck, the lock lugs are stuck in chamber star. How can I remove? Should I ship it back to either noveske or dd?
Noveske barrel, DD bolt & receiver. |
|
Quoted:
thanks that worked, i put the tula case back in there and itgot stuck again. do you think its thecheap ammo or somethi g wrong with bcg. You removed the stuck round, then tried to chamber it again? Was the bullet bent in the case mouth? Do you have a picture of the stuck round? When was the last time you cleaned the chamber? Try cleaning the chamber, and running a few boxes of hot brass cased ammunition to smooth everything out. |
|
Quoted:
Quoted:
thanks that worked, i put the tula case back in there and itgot stuck again. do you think its thecheap ammo or somethi g wrong with bcg. What do you think??? round got stuck twice...clean your chamber and spend some money on decent ammo.. it was extra ammo I had left that my stag m8 are it all up. I guess I need to shoot only brass. |
|
Quoted:
The round fired, it was a empty case I rechambered. The steel car looked normal, no noticeable wear/damage. It is brand new barrel and receiver and bcg. Ah yes, if you try to re-chamber a fired case out of a semi-auto rifle it will almost always jam the action shut. If your rifle chambered an empty case instead of ejecting it check that your ejector in the bolt face is working correctly. |
|
Quoted:
Quoted:
The round fired, it was a empty case I rechambered. The steel car looked normal, no noticeable wear/damage. It is brand new barrel and receiver and bcg. Ah yes, if you try to re-chamber a fired case out of a semi-auto rifle it will almost always jam the action shut. If your rifle chambered an empty case instead of ejecting it check that your ejector in the bolt face is working correctly. I put a round inn the extractor and it won't even start on, the ejector plunger is kicking it out strongly. |
AR Sponsor