[ARCHIVED THREAD] - Buffer Retaining Pin Stuck in Depressed Position

Posted: 12/11/2008 7:13:19 PM EDT

Any tips to release it? Tried lube and needlenose pliers, but it won't budge.

Posted: 12/12/2008 7:24:46 AM EDT

[#1]

Pull the receiver extension and try again.

Could be something wedged in between the front portion that is under the extension.

Posted: 12/12/2008 1:27:43 PM EDT

[#2]

It is well below the edge of the buffer tube (stuck nearly fully depressed) and I checked for obstructions (no metal, carbon or sludge build up, etc.). I attempted to use needle nose pliers, but can't get a good purchase to break it loose. It does not appear to be jarred/canted. I know it is not necessary for the weapon to function, but I would like to fix it. I want to avoid having to drill it out and replace it if possible.

Posted: 12/13/2008 7:27:21 AM EDT

[#3]

Try pushing down on it first then up . You might have to get a set of vise grip needle nose pliers. twist left and right while pulling up. when you get a replacement use wd40 or similar and work the new one in and out so it moves freely.

[ARCHIVED THREAD] - Buffer Retaining Pin Stuck in Depressed Position

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Buffer Retaining Pin Stuck in Depressed Position

[ARCHIVED THREAD] - Buffer Retaining Pin Stuck in Depressed Position