AR Sponsor
Posted: 12/4/2007 3:11:22 AM EDT
|
hello; new del-ton kit rifle, m4 config., standard trigger. trigger is VERY LIGHT and grittie. the very light, way less than 3#, is my concern. is there a simple fix? replacing the springs? don't mind 5-7# trigger pull. this trigger is scary light. any suggestions. thanks. rp |
|
Double check the springs and how they where installed, www.ar15.com/content/guides/assembly/lower/ Note the hammer spring legs should be on top of the trigger pin, not resting on the receiver floor. Also confirm that you have the correct FCG pin/part size installed for what the receiver pin holes require, such as a older colt receiver would use .174 pins and FCG parts, while a new colt or other type of receiver would use a .154 pins and FCG parts. |
AR Sponsor