[ARCHIVED THREAD] - Ejector spring stuck

Posted: 9/4/2004 4:58:46 AM EDT

Too wierd.

I had removed the ejector and spring on a bolt while checking headspace.

I attempted to put the ejctor back in, and was pushing the pin in. The pin seemd to bind, I thought I may have had the ejector positioned wrong.

I took the pin and ejector out, now the spring is stuck in there.

I can depress the spring with a small pin, but not with the ejector.

Any ideas?

Posted: 9/4/2004 5:00:46 AM EDT

[#1]

dental picks are a good thing to have around... see your dentist, they dispose of these quite often.

Posted: 9/4/2004 11:37:27 AM EDT

[#2]

After you get the spring out deburr the tunnel with a bit of the correct size. There is probably a burr on the insides of the ejector pin holes.

[ARCHIVED THREAD] - Ejector spring stuck

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Ejector spring stuck

[ARCHIVED THREAD] - Ejector spring stuck