AR Sponsor
Posted: 2/20/2016 8:22:12 PM EDT
|
PSA upper, bolt from PSA, lower build kit from PSA, Anderson lower, trigger from SI, A1 butt stock from Charlie's Surplus and a 3X12 Bushnell with 56 mm objective lens, small illuminated red dot and those cross hairs that are thick on the bottom and sides almost to the center with a top cross hair that is thin from top to center (never used one of those before, but it's okay).
Had some issues first time out with the A2 butt stock screw interfering with the rearward movement of the bolt (short stroking and bolt not locking back on an empty magazine. Got that dremeled down to size and function is fine. Working on some new/different loads for it. It's got an 18" SS barrel with a .223 Wylde chamber. I might end up really liking it. The little piece of skateboard tape helps me find the same cheekweld every time (haven't tried it yet, but I need something. Can't get my nose on the charging handle with the scope placement. Might have to order a new scope mount that allows the scope further forward while still keeping the mount on the upper receiver. 
|
AR Sponsor