AR Sponsor
Posted: 3/3/2013 7:51:11 PM EDT
| Has anyone had an out of spec trigger? I have one from a LPK that won't fit within the receiver. I checked the width and it appears to be significantly wider than the other triggers I have on hand. This trigger is .697 in width while the others are .680 - .684. I can probably take a little off each side bit I'm wondering how common is this? I've put together several lowers and never ran into this before. |
|
Quoted:
What name brand of LPK did it come from? Unfortunately, I don't know. The FCG was pulled from one of several LPK's I had on hand about four years ago and sent to a rather well known individual who does trigger work. Once it was returned to me, the envelope and parts have sat for the past coupe of years until I finally pulled them out for a build project. Looking back at my records, it looks like I was using RRA LPK's at the time. No way to be sure who made the trigger as there are no markings. I realize too much time has passed and there's no recourse with the supplier. |
AR Sponsor