AR Sponsor
Posted: 1/8/2013 1:12:09 AM EDT
|
Hi guys, need some help. I purchased a LPK, I layed everything out to compare it to the assembly guide here and turns out I am missing a spring. I narrowed it to two springs:
Buffer Retainer Spring - second largest spring in the kit. Magazine Catch Spring - this is the largest spring in the kit. Without the other spring, I have nothing to compare it to so i don't know if it's the largest or second largest spring. Can someone help me on identifying this spring. Thanks in advance. http://www.calguns.net/calgunforum/attachment.php?attachmentid=191264&stc=1&d=1357639740 http://www.calguns.net/calgunforum/attachment.php?attachmentid=191265&stc=1&d=1357639768 |
|
Quoted:
it looks like the bottom two springs in your picture. According to my picture, it is 1 1/8 inch in length and about 5/16 inch wide The one to the bottom right would be the magazine catch spring im pretty sure. This is a good schematic to go off of. http://www.dsarms.com/pdf/AR15-SchematicPDF.pdf |
|
Quoted:
http://media.midwayusa.com/productimages/880x660/primary/496/496298.jpg Which spring does it look like in this picture, having trouble understanding your question tbh. Top Row (left to right): safety, disconnector, buffer detent, front or rear take down pin, bolt catch (top), extractor (bottom), dust cover/port door, safety, and front or rear take down pin. Bottom row (left to right): trigger, forward assist, hammer, and mag release. |
AR Sponsor