AR Sponsor
Posted: 11/25/2012 5:43:33 AM EDT
|
Now I'm sure I'll get e-raped and ridiculed for this but it's an idea I have. I'm thinking about engraving a small Texas outline on an upper and lower I have a la Noveske. It's not original but I haven't seen it done lately on home brewed builds. The idea came from my factory built Noveske N4 I bought a few years back. Noveske as you know engraves the upper and lower with their logo as depicted on the first picture if it's factory built. I thought it was pretty cool that they did that.
Fast forward to today... I have a stripped upper and lower that is from a known Texas company that I had to literally mate together. The upper and lower are BANK VAULT tight but workable. I couldn't say that when I got the two. 
Since I'm a native Texan and proud of this fine state, I thought about having the upper and lower engraved with a small outline of Texas...about the same size as the Noveske logo. With the upper and lower joined together it would form the complete state. I don't plan on separating the two and using them with other lowers and uppers. They are together forever. Awwwwwwwww. 
Cheesy idea?? The logo will be small and just surface engraved from a professional shop (probably Ident Marking). The Noveske logo (it's about 7mm by 7mm) 
The proposed Texas outline would be in the area of the blue tape roughly the same size as the Noveske logo. 
|
|
Quoted:
Quoted:
Heard back from Ident. I'm going to have it done (surface lasered) for much less $$ than I thought. Time to send it in. Stay tuned. I'll update whenever I get it back..  I like your idea, how much was the quote on the laser engraving? $50 since it was going to be small. |
AR Sponsor