[ARCHIVED THREAD] - Phantom FH?

Posted: 9/9/2011 6:43:55 PM EDT

any of you know how deep the threaded portion of the Phantom FH is. I need to know the depth at which it will bottom out on a muzzle because i have a barrel that is threaded longer than standard.

thanks!
advntrjnky

Posted: 9/9/2011 6:52:01 PM EDT

[#1]

thinking 9/16".. but my YHM 5M2 Brake is pinned currently..

others may be able to chime in..

try a crush washer or possible lock nut (that come with some FH's/Brakes) to take up the gap maybe..

Posted: 9/9/2011 7:24:44 PM EDT

[#2]

yeah, that's what I'm trying to figure out.....I have a few different styles and thicknesses of washers to play with. The Vltor FH i used on another build was threaded pretty deep and worked well. if the Phantom isn't about the same depth I'll probably just go with the Vltor again.

advntrjnky

Posted: 9/10/2011 6:34:39 AM EDT

[#3]

My 5C1 should arrive Tuesday, if you can wait that long I'll put the calipers to it.

Posted: 9/10/2011 6:39:49 AM EDT

[#4]

.580" Deep

Posted: 9/10/2011 8:49:17 AM EDT

[#5]

Thanks for the measurement!

OlsenG - i would appreciate it if you could let me know if that is what you get to.

advntrjnky

Posted: 9/10/2011 5:39:06 PM EDT

[#6]

Quoted:
Thanks for the measurement!

OlsenG - i would appreciate it if you could let me know if that is what you get to.

advntrjnky

will do!

Posted: 9/17/2011 1:20:34 PM EDT

[#7]

Sorry for the delay, fedex is being difficult this week. Measurement I got from mine was right at .580 also.

Posted: 9/17/2011 5:01:29 PM EDT

[#8]

thanks!

[ARCHIVED THREAD] - Phantom FH?

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Phantom FH?

[ARCHIVED THREAD] - Phantom FH?