AR Sponsor
Posted: 12/20/2010 5:06:56 PM EDT
| So I am building my father's Christmas present, an m4forgory on a roggio arsenal lower He bought at a gun show six months or so ago. So this after noon after work I went and slipped the lower out of his safe to start building it and have run into some problems. This is my fourth build or so, and yes I know that roggio has some issues. My father did not know Roggio was a bad company when he bought the lower. The main issue seems to be with the trigger and hammer safety group. When the hammer is cocked the top hook on the disconnector catches the hammer and will not let it fall with the selector on fire. What am i missing? Could it be that the whole da** lower is out of spec. The Only other issue I have noticed is a tight mag well. The lower parts kit is an AR-Stoner. |
First off, check your sear engagement. Take the disconnector out and see if the trigger functions normally. If the pull is OK and everything seems fine make sure you have the right spring in the disconnector, being your 5th assembly I'm assuming you know which is the right one.  If all that looks good go check out THIS VIDEO. It's specifically about fitting the disconnector in a JP, but gives a good how-to on modifying your disconnector nose.
|
|
I just went through a whole huge issue with a Roggio. i have a thread on here about it. anyway, my advice to you is buy your dad another lower and have him make a nice paperweight outta his. i was lucky enough to be able to take mine back and get better brand of my choice for the same (cheap) price.
Its not worth your time f***ing with the peice of sh**. |
AR Sponsor