[ARCHIVED THREAD] - Geasers, dude.

Posted: 10/22/2010 8:52:43 PM EDT

Where and what kind of grease do I apply to the upper assembly. This is including the barrel/barrel nut/any free float parts; also the flash hider. Thanks.

Posted: 10/22/2010 9:08:12 PM EDT

[#1]

tacked thread at the top of the page should help

Posted: 10/23/2010 6:47:07 AM EDT

[#2]

MIL calls out Molybdenum Disulphide, because MIL has to call out everyhting. You can use any good wheel bearing type grease (synthetics work well). You just need a dab, since you are just trying to keep the barrel nut from galling the receiver.

Posted: 10/23/2010 7:12:17 AM EDT

[#3]

'Geasers', thought this was a roll call for the older AR15ers.

As for 'greasers', I use very little on my ARs. I have learned that it is not really necessary.

TRG

Posted: 10/23/2010 7:26:02 AM EDT

[#4]

Quoted:
'Geasers', thought this was a roll call for the older AR15ers.

As for 'greasers', I use very little on my ARs. I have learned that it is not really necessary.

TRG

For building them? You need to use something.

I use a graphite free anti-seize or PL-10 grease.

[ARCHIVED THREAD] - Geasers, dude.

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Geasers, dude.

[ARCHIVED THREAD] - Geasers, dude.