AR Sponsor
Posted: 10/17/2010 11:10:27 AM EDT
|
Like I've said before, I'm new at this.
Got my AR-15 kit from Century and need some information. I know it is forced on, so what kind of a tool do I need to attach the Front Sight Housing to the barrel so I can install the Gas Tube? Also, where do you get such a tool with instructions? Thanks for any help. MauserK98 |
|
Quoted: If you want the FSB for iron sights then the FSB needs to be mounted in the factory when the gas port is drilled, for best results... I'm told. Coming back after the fact to install a FSB is not something that can be done as correctly... I'm told.Thanks everyone. Looks like I've been sent an unfinished barrel. My barrel does not have these drill holes, Will be calling customer service. Thanks again MauserK98 If you are going to use a floating hand guard and a scope instead, then you can use a clamp on FSB with no sight tower and the FSB holes are not needed. |
|
You've been told wrong.
This comes up so often, I'm surprised so few know it can be done. Clamp on is a good call, as you can still go back to a pinned FSB http://www.brdengineering.com/ 458 |
AR Sponsor