AR Sponsor
Posted: 3/29/2010 6:28:02 AM EDT
| So i just finished my first lower build and took it for a test run. the trigger is doing funny things the first 5 rounds i had to cycle the selector from safe to fire cause the tigger wouldnt return to fire postion if i didnt. then i found if i squeezed it really hard it would return on its own, then it worked fine for like 200 rnds. then it started to do it again - has anyone had this problem? im using all new componets - even wolff springs. the trigger is a stock unit, its just wierd that it does this.. thanks |
| Double check that your springs are installed correctly, especially your dis-connector spring (large end down). As a test, try your standard set of springs and see if the problem reproduces. In other words, rule out any problems with the Wolff springs, then start troubleshooting other areas of your FCG. |
AR Sponsor