AR Sponsor
Posted: 2/12/2010 7:15:52 PM EDT
|
i an collecting the last of the items i want to order from our tax money before the wife takes the debit card. i already have 2 maglevel pmags to add to my 2 ez mags for a total of 4 mags for the ar, 2 15rd mags for my browning, i am thinking of a BCM stripped upper and BCM auto BCG to start off my 1st ground up build. speaking of my first ground up build, what tools should i aquire? is something like this all that i'll need?
i'm thinking i should get some ammo since i'm only sitting on 180rd right now, but i'm also thinking i might do well to invest in a reloading kit. any advice? ETA: fix freudian slip |
| DPMS panther claw.........some type of Armorers wrench.......I use Armalite inc...........good set of pin punches.........I use Mayhew.......brass and nylon punches.........dead blow hammer........rubber mallet.......ball peen hammer........snap ring pliers...........screwdrivers....I use the Chapman set........... |
|
Im in the same boat as u guys, im working on my gunsmith set. Would this be a good purchase and replace most of the hammers ill need?
http://cgi.ebay.com/CRAFTSMAN-HAMMER-GUN-GUNSMITH-GUNSMITHING-TOOLS-PARTS_W0QQitemZ360234455472QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item53dfa591b0 |
|
Roll pin punch set from eBay under $20
http://cgi.ebay.com/9-Pc-Roll-Pin-Punch-Set-GRIP-NIB-Pilot-Punch_W0QQitemZ200437685327QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item2eab045c4f Drift punch set from eBay under $20 http://cgi.ebay.com/GUNSMITH-BRASS-STEEL-AND-CENTER-PIN-PUNCH-MASTER-SET_W0QQitemZ270527712987QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item3efcb54edb Brass hammers are nice, but really not needed… http://cgi.ebay.com/Dual-Brass-Mallet-Hammer-Gunsmith-Military-Surplus-Tool_W0QQitemZ350306874901QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item518feab615 Barrel wrench from just about anywhere for about $20 LINK Set of ball end Allen wrenches Sears, auto parts store, Harbor Freight… ect Spikes has a really good castle nut wrench on their site for about $20 LINK Vice block: I suggest the Block-Worx one that Spikes sells it is the most solid that I've used for flat tops. LINK Pic of block from the web… 
|
AR Sponsor