AR Sponsor
Posted: 9/4/2009 12:23:16 PM EDT
|
Well, technically, I just built the lowers. But still, I'm pretty happy. These are for my father and I. Thanks to this forum for providing the directions and assistanc
Upper Noveske SPR with VIS. Lowers Tactical Innovations T15BDX Billet Lowers (which, incidentally, has some neat features to it) Timney Triggers KNS Gen 2 Mod 2 Pins WOA LPKs Sierra Precision SPR Grips Magpul UBRs The Optics are Bushnell 6200 Elites, 1.8-8 on my Dad's, 2.5-16 on mine. Mounted in, of course, Larue mounts. Here they are, in crappy iPhone pic format. http://img197.imageshack.us/img197/5921/img0027jy.jpg |
|
I'm doing my 8th lower build but the first with a Timney trigger and by coincidence, also a T15BDX lower. Did you have any problems with the selector? Mine was too tight to get installed so I backed out the Timney trigger mounts set screws and was able to wiggle it over the end of the disconnector. It's installed now but seemed very snug. Also, for the rear take down detent spring, did you need to take off a few turns to seat it under the set screw?
Thanks, Jim |
|
Quoted:
I'm doing my 8th lower build but the first with a Timney trigger and by coincidence, also a T15BDX lower. Did you have any problems with the selector? Mine was too tight to get installed so I backed out the Timney trigger mounts set screws and was able to wiggle it over the end of the disconnector. It's installed now but seemed very snug. Also, for the rear take down detent spring, did you need to take off a few turns to seat it under the set screw? Thanks, Jim Jim, On the first lower, the selector was a tight wiggle to get in, but now doesn't seem particularly tight. The second, I slid the selector in, then installed the trigger, and it fits like a dream. As for the detent screw, I was able to get it there without taking any off. It was definitely a bit of a bear though, took some work to get it in place. |
AR Sponsor