[ARCHIVED THREAD] - Tactical bolt catch

Posted: 9/24/2008 8:23:55 PM EDT

Any one have a tactical bolt catch ? I was looking at a DPMS one. How hard is it to change ?

Posted: 9/24/2008 10:45:22 PM EDT

[#1]

Use punch tap out pin, just look how it comes apart pretty easy, just reverse it.

Posted: 9/25/2008 12:09:29 AM EDT

[#2]

beware uf da springz!!!!!!

check the building a lower thread and pretend its a tac catch.

like above, It's pretty easy

Posted: 9/25/2008 9:45:36 AM EDT

[#3]

And they hang up on your gear, and just generally get in the way...you can just slap the side of the rifle and the standard bolt catch will work as intended...

Posted: 9/25/2008 11:48:54 AM EDT

[#4]

I would strongly advise against it. Unless you want to get it hung up on everything and jut be an all around pain in the ass.

Posted: 9/25/2008 2:03:57 PM EDT

[#5]

I picked up a Wilson Combat oversized one. Its actually a good investment because if you find you hate it all you have to do is remove one set screw and you have a normal bolt catch you can use.

This way you save yourself at least having to remove everything.

Brian

Posted: 9/25/2008 3:03:37 PM EDT

[#6]

Scoped guns only...otherwise a PITA

Posted: 9/25/2008 6:51:01 PM EDT

[#7]

Don't buy into the tacticool stuff. Normal bolt catch works fine. If you're a 3 gunner and lookin for speed, all it takes is some practice. Tacticool bolt catch won't help you any more than the regular ones, imo.

Posted: 9/25/2008 6:58:33 PM EDT

[#8]

Quoted:
Scoped guns only...otherwise a PITA

Posted: 9/26/2008 6:09:21 AM EDT

[#9]

Get used to pullin the T handle for tactical stuff, It ensures full travel of the bolt carrier when done correctly. get a Gas buster instead it's and excellet product.

[ARCHIVED THREAD] - Tactical bolt catch

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Tactical bolt catch

[ARCHIVED THREAD] - Tactical bolt catch