AR Sponsor
Posted: 8/30/2008 11:59:45 AM EDT
| Ok I have a RRA lower and RRA 2 stage trigger. Which lpk should I get? |
|
Lower parts kit from White Oak at ADCO should be what you need to finish the lower Receiver. White Oak Lower Parts from ADCO |
|
I prefer Stag/CMT but why not keep it all RRA and go with thier LPK as well. I think I would do that. As an aside I have used Armalite and DPMS LPK's as well and they have all worked well and all seemed to be within spec....<><....:) So - my vote is keep it all RRA.... Oops!! I forgot one more, I have a CMMG LPK installed in my CMMG lower also and it is fine... |
I was thinking that just didnt know if the lpk really mattered on brand. I already have one complete RRA that I really like that's why I decided to do my own build on thier lower. |
|
I generally don't like DPMS lpks. But that's more due to that nasty trigger and reset. I was impressed with the standard CMMG one. Best standard setup I've head the pleasure of installing and shooting. Of course, my lowers seem to be all different. I've got Stag, CMMG, Bushmaster, DPMS, Olympic Arms and Armalite. Funny thing is, all of them work. The only mod I had to do was the 15 minute trigger job on the DPMS. |
Concensus seems to be RRA. That would be my vote. I have installed a DPMS that went fine, brother had a shortage. Had a J&T that was short and out of spec, never will use them again. From here on out it's RRA for me. |
That White Oak lower parts kit is missing the fire control group: hammer, hammer spring, trigger, trigger spring, disconnector, and disconnector spring. I reread your OP and see that you have the RRA 2 stage trigger, so the White Oak lower parts kit should work out fine, unless you want to have an extra fire control group. It's always good to have some extra parts for our AR's. Otherwise, I suggest RRA, DPMS, Stag, or CMT lower parts kits, your choice. 
|
Please advise, what is the 15 minute trigger job? I see this refered to but have no idea what it entails. Thanks. Bill |
AR Sponsor