AR Sponsor
Posted: 8/18/2008 11:31:36 AM EDT
|
Do you use the crush washer with the Phantom? I put the crush washer on and the Phantom stops 90 degrees off (the blank section without vents points to the 9 o'clock position when looking down from the receiver) If I do it without the crush washer, will it be properly aligned? |
| Sometimes you have to thin the CW a little bit. You should not have to tighten them more than 1/2 turn but it seems I always get one that is between 1/2 and almost a full turn out. Just thin the CW with a file until the Phantom is about 1/4 turn out and then "crush" it the rest of the way until indexed properly. |
)
AR Sponsor