AR Sponsor
Posted: 7/15/2008 8:00:06 PM EDT
|
I have a tool in my tool box that I can't figure out what is is for. I believe it is from browneils. It is pin punch like black with a knurled handle, about 3/16 in diameter. the center if the pin punch has a hole, concentric with the punch, about 1/16 dia. Then there is a flat ground on one side of the punch from the tip to maybe 1/4" back. they removed most, but not all of the material from the outer diameter to the center hole. It almost has to be a AR15 or 870 specific tool. Were the diameter different, I would think it mite be a tool for the AR15 pivot pin, but its too small, and there would be no need for the center drill. TIA edited for typos |
| I'll post a pic tommorow. My camera is TU. so I'll have to borrow one. Unlike the bolt catch pin punch, my handle is standard diameter, they just machined a flat on the end of the punch from the tip to 1/4" back from the tip. Handle is round, knurled and probally 5/16" diameter. |
AR Sponsor