AR Sponsor
Posted: 12/8/2006 8:43:56 AM EDT
|
Here is first part (posted in pic section but thought I'd put it in a seperate thread. http://www.qsl.net/kf6myv/ar15/lower%20004b.JPG FedEx truck is out there somewhere now w/ my trigger assembly, mag lock kit, extended take down pin, and grip. This build may take me some time to complete but fun so far. |
|
Whats on its way is: 1 x Stag Lower Receiver Parts Kit 1 x Prince50 Designs Mag-Lock Kit 1 x Watson EXTENDED Take Down Pin Upper will probably be CMMG and the mag from TenPercent(30rnd blocked to 10rnd). Not sure on buttstock yet. Next build? Hmmm gotta get through this first. |
|
Ok here is what I have now. I used that brass tubing I had and drilled a hole in it so that I could install the Pivot Pin. Used the key to push in the detent. http://www.qsl.net/kf6myv/ar15/lower37b.JPG Now if I only had that trigger |
|
Looks good. I am sure Stag will make good on the trigger. Look at this way. When you reveive the trigger, you will have an extra hammer. You can use it to experiment with the home trigger jobs that involve lightning the hammer. Or you will have a spare. Let us know how the rest of the build goes. Have Fun, Geof |
| Added the magazine http://www.qsl.net/kf6myv/ar15/IMG_3196.JPG |
|
Added buttstock....still no trigger hinking.gif http://www.qsl.net/kf6myv/ar15/AR15.jpg |
|
Its going to be a while before I can get my upper but I am finally starting to get a tad impatient w/ this trigger situation hinking.gif I want my trigger!!! Please h.gif |
(Ca law, not your build!)
If I was going to use a mag that was fixed, and limited to 10 rounds - I would want it to protrude only the 10 rounds worth. Smaller profiles are better.... if we could fit 30 rounds in a 10 round prfile we all would. Using a 30 rounder just for looks is kinda poserish. I guess I might be more inclined to have the 30 round "look" just because CA didnt want to me..... but if I did that at ALL, it would be the 20 rounder. |
|
Hey, we all have our own preferences and I prefer to have the look of a 30 rounder. If I didnt care about looks I woulda gone detachable w/ the hokey look of the non pistol grip. Not what I wanted though. To each his own. If your happy with what you create than thats great. I know I will be happy w/ what I make hat Oh and by the way, 10 round mags dont pertrude at all which looks really gay in my opinion. Like theres nothing even there. |
That just happens to be a 10 rounder that is cut that way then blocked up. They can make 10 rounders that are shorter, and do not protrude: www.quarterbore.com/ar15m16/fab10.htm |
| HEY!!! A trigger! Not only a trigger they sent another hammer as well. Now I have three http://www.qsl.net/kf6myv/ar15/Gators%20011.jpg |
|
he Sorry my pics are not showing. I think the system they are on is getting updated. Hope they come back. |
|
Well folks it has arrivedhttp://www.qsl.net/kf6myv/ar15/AR15%20047.jpg I need a rear sight though....well and some ammo |
|
Where you at in CA??? I am in the Bay Area. It's nice to see 2 AR born within a day of each other. I just finished mine yesterday. From start to finish in 1 day. Here is the link: My first ever build. AR-15 16" CA (lots of PIC) So the mag you got is actually a 10rd but looks like a 30 rnd??? Does it have a pin so you can't load more then 10rd. Where did you get it? Also what are you using for mag release? looks like Prince50 Mag Lock but i can't really see. You heard of Bullet-Button? |
|
Ah yes very nice build. I am in Folsom about 30miles east of Sac. Yes that is a 30 blocked to 10. It looks like they just punch in a little flap from the outside to block it. I got that from tenpercentfirearms.com looks like their sold out at the moment. The mag lock is the one from coldwarshooters.com looks like it must be the Prince50 then since thats what they sell. Bullet-Button, nope. Whats that all about? |
AR Sponsor