Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
AR Sponsor
3/15/2006 3:31:38 PM EDT
So is the sling mount on the front sight base held on by a pin? I want to remove mine but don't want to just start hammering on it with a punch. Thanks.
3/15/2006 7:44:47 PM EDT
[#1]
well, if you dont start hammering on it with a punch, then you wont ever get it out of there.

get a punch that fits in the dimple, and hammer it out.
3/15/2006 8:49:54 PM EDT
[#2]
I took a dremmel to the Mushroomed part of the rivit and then with almost no force pushed the rivit out.
It took me longer to round up the tools than to do it






Invisiblesoul
3/15/2006 9:45:29 PM EDT
[#3]
www.ar15.com/forums/topic.html?b=3&f=118&t=272659


Quoted:

Quoted:
Yep a 1/16" punch in the dimpled portion.  A good sharp whack from a hammer and it will drive the rivet out, and the sling swivel will drop when you pull out the punch.


what he said

3/16/2006 5:25:45 AM EDT
[#4]
I've removed a couple using a 3/16" drill, very lightly to thin the rivet, then a 1/8" punch to drive it out.  Go easy with the drill or you will start cutting the FSB material.
3/16/2006 9:43:01 AM EDT
[#5]
hammer and punch away
AR Sponsor