Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 2/21/2006 5:34:50 PM EDT
[Last Edit: 2/22/2006 8:47:22 AM EDT by calugojr77]
Is this a Colt 6520 LE upper? Here is a link to a photo of it.


I fixed the problem with the link. It should work now. It was set on private.

It has m4 feed ramps, and I believe the forge marking is a cardinal head.
Link Posted: 2/21/2006 5:43:26 PM EDT
Link doesn't go anywhere
Link Posted: 2/22/2006 2:34:32 AM EDT
Works now

It is an A2 upper, which may or may not be from a 6520. Colt uppers generally have a "C" on the carry handle ahead of the rear sight. 6520 uppers usually have M4 feedramps and are marked with a "4" or "M4" above the gas tube cloverleaf.
Link Posted: 2/22/2006 7:48:53 AM EDT
Link Posted: 2/22/2006 9:51:12 AM EDT
I sold an A2 6520 upper receiver. It did NOT have the "C" marking on it. It did have the key-hole Cerro Forge marking though.

It also had the M4 feedramps, in the white (not anodized)

And it had the Colt black-colored ejection port cover spring.

I took it off to replace with a CMT M4 flattop.

Pictures can be found here: www.ar15.com/forums/topic.html?b=7&f=22&t=327916

If it has the M4 ramps (done by Colt, not some do-it-yourself dremel job), black spring...it's probably from Colt.
Top Top