Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
4821 Online
bravocompany bravocompany bravocompany
brownells brownells
tnvc tnvc tnvc
AR15.COM
bravocompany
My Account
bravocompany bravocompany bravocompany
brownells brownells
tnvc tnvc tnvc
midwest
fightlite
JRH
bravocompany
vortex
magpul
silencerShop
DFC
RS
primaryArms
palmetto
springfield
OSIGHT
brownells
geissele
skd
Guns
colt
aim
GS
Holosun
cz
4821 Online
cz
JRH
OSIGHT
magpul
bravocompany
fightlite
vortex
brownells
skd
springfield
primaryArms
colt
geissele
silencerShop
GS
palmetto
Guns
DFC
aim
RS
midwest
Holosun
AR Sponsor
Site News Could You Have Stopped This? Vegas Shooting Analysis with Attorneys on Retainer
Sponsor News Introducing TNVC's NEW and Exclusive Filmed SuperGain (FSG) and Chimera Panoramic Goggle Giveaway!
2/2/2006 1:36:54 PM EDT
OK I have been trying to search and find an answer.

On a 16" Barrel Threaded If you put lets say a AK style brake on. Does it have to be PINNED AND WELDED. Or can it just be welded for use on a PostBan AR15.
2/2/2006 1:38:51 PM EDT
[#1]
permanently attatched is what is needed to be done.



either pinned and welded over or silver soldered.
2/2/2006 2:04:21 PM EDT
[#2]
Thanks so just welding is ok without the pinning has I understand. Isn't Silver Solder the same has welding?

I have been useing the High Temp paste without pinning.
2/2/2006 2:40:15 PM EDT
[#3]
Quoted:
Thanks so just welding is ok without the pinning has I understand. Isn't Silver Solder the same has welding?

I have been useing the High Temp paste without pinning.



High Temp Solder?  This is not the same a silver solder.  Sure it is silver in color, but silver solder melts at about 1100 degrees F.  If your barrel is 16" why do you want to permantly attach a flash suppressor?  Are you in a state that requires it?  Probably so since you are from NY.
2/2/2006 2:58:53 PM EDT
[#4]
Yea I live in NY...I use the Fusion 1260 silver braze melts @1220 Deg F.

I use it for the FAL's I do but I need to put a AK47 Brake back on a 16" after I floated it.

The big question is does Pinning have to be done in NY on a 16" PostBan Rifle.
2/2/2006 3:01:29 PM EDT
[#5]
pinning is just one of the ways to permanently attatching the muzzle device which is what is required.
2/2/2006 3:15:09 PM EDT
[#6]
Quoted:
Yea I live in NY...I use the Fusion 1260 silver braze melts @1220 Deg F.

I use it for the FAL's I do but I need to put a AK47 Brake back on a 16" after I floated it.

The big question is does Pinning have to be done in NY on a 16" PostBan Rifle.


No, Batf states that the solder has to have a flow point of higher than 1160*.  Just make sure you get bond .
2/2/2006 3:17:30 PM EDT
[#7]
10-4 Thanks
AR Sponsor
silencerShop
LAPG
LAPG
ar15com
primaryArms
springfield
gray
SAS
bravocompany
brownells
fightlite
palmetto
Faxxon
blackhills
ar15com
geissele
CA
colt
Pro2A
ar15com
cmmg
RS