Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 1/23/2006 11:17:27 AM EDT
[Last Edit: 2/20/2006 12:42:43 AM EDT by singlefire]
.
Link Posted: 1/23/2006 11:33:58 AM EDT
Dont do it,i would guess you will get your hands burnt.
Link Posted: 1/23/2006 12:07:11 PM EDT
the rifle would become a single shot along with a face full of gas.
Link Posted: 1/23/2006 2:23:04 PM EDT

Originally Posted By eklikwhoa:
the rifle would become a single shot along with a face full of gas.


+1= Bad idea.
Link Posted: 1/23/2006 3:21:30 PM EDT
Wrong tool to start playing with if you don't have all the parts.
Link Posted: 1/24/2006 9:29:28 AM EDT
[Last Edit: 2/20/2006 12:43:09 AM EDT by singlefire]
.
Link Posted: 1/24/2006 9:33:35 AM EDT

Originally Posted By singlefire:
Thanks for the feadback guys. Trying to avaiod the face full of gas if possible!

What about the short tube idea of venting the gas inside the handgard? Bad Idea, it'd probably melt something or burn your hand.
Or blocking the hole completely with a small tube cut off at the sight, but fixed in properly with the tube pin? Then you would have a bolt action.

Would the pressure be too much for the sight mounting to take?

thanks Darren



MJD
Link Posted: 1/24/2006 10:01:27 AM EDT
He lives in England.
This might have something to do with his project, yes?
Link Posted: 1/24/2006 10:26:53 AM EDT
[Last Edit: 2/20/2006 12:43:27 AM EDT by singlefire]
.
Link Posted: 1/24/2006 10:37:54 AM EDT
[Last Edit: 1/24/2006 10:40:15 AM EDT by highwayman]
Singlefire, turn you IM's on. It says you're not accepting site IM's. I sent the info to you via email, but it's just a whole lot quicker to IM. MJD
Link Posted: 1/24/2006 10:42:28 AM EDT
sorry about that. Doh!

I've now turned IM's on

thanks
Link Posted: 1/24/2006 11:02:14 AM EDT
Isn't port pressure on a rifle still about 20000 psi? I would be careful about where the gas went, or how I plugged the tube. I would still fire the first few rounds with string on the trigger and some cover, but then again, I like being able to see. BSW
Link Posted: 1/24/2006 11:09:15 AM EDT
[Last Edit: 2/20/2006 12:44:03 AM EDT by singlefire]
.
Link Posted: 1/24/2006 11:33:29 AM EDT
Tag for range-report
Link Posted: 1/24/2006 11:34:26 AM EDT
HAHAHA...in a few days we'll be reading how some guy in the UK shot himself between the eyes with whatever he tried plugging the gas port with because his country doesn't trust it's citizens with guns. Might be a good enough reason for the people to change things over there.

The ONLY thing I would trust my face to would be another barrel that wasn't drilled for a gas tube or a solid block to pin in the FSB.
Link Posted: 1/24/2006 2:07:52 PM EDT
semi auto illegal? even the california single shot unit from DPMS wouldn't work?

septic tank

Link Posted: 1/24/2006 2:08:31 PM EDT
sounds like it is time for a 6.5 Grendel!!!



septic tank

Link Posted: 1/24/2006 2:17:33 PM EDT
Makes Kalifornia sound good!
Link Posted: 1/24/2006 6:16:25 PM EDT
get an adj gas block and screw it in all the way. dont know if its legal since it could be fired semi with the gas block open. or get a barrel without a gas port. any mag restrictions?
Link Posted: 1/24/2006 7:55:45 PM EDT
[Last Edit: 1/24/2006 7:57:50 PM EDT by Milldude]
singlefire-
Have you posted this over in the United Kingdom Hometown Forum? Maybe see what your fellow shooters "across the pond" have to say. Good luck!

ETA- link to UK HTF----> www.ar15.com/forums/forum.html?b=8&f=5
Link Posted: 1/24/2006 9:30:23 PM EDT


Whatever you do, don't plug the tube-hole with a golden BB.
Link Posted: 1/24/2006 10:26:23 PM EDT
Link Posted: 1/24/2006 11:06:07 PM EDT
My friend did this a couple of weeks ago. He installed a barrel and ran out of rear sight adjustment. We did not want to keep putting the gas tube back on after we made our adjustments so we didn't. We put the hand guards on, along with safety glasses, and a full face shield. The first shot did nothing, but the second shot lifted the top hand guard off at the rear slightly. It still was not off, but I do think the next shot would have lifted it off for sure. We put it back on, and after EACH shot we seen the the delta ring was pushed back a little so the hand guards start to come out. The face shield had nothing on it, BUT that does not mean crap didn't bounce off of it. After that, a couple wraps with duct tape, and she was good to go. We shot it 30 times like that just to see what would happen. Well, HE shot it 30 times. I watched.....................from a distance.
Link Posted: 1/25/2006 7:22:51 AM EDT

Originally Posted By Punani:
Tag for range-report hr



he , this his , or this hatever
Link Posted: 1/25/2006 11:34:20 AM EDT
[Last Edit: 2/20/2006 12:30:26 AM EDT by singlefire]
thanks for the input guys, some serious, some funny and some I'm not sure are sane.

cheers
Link Posted: 1/30/2006 10:25:34 PM EDT
just put a gas tube on the thing and fire it semi auto.... I wont tell if you dont tell...
Link Posted: 1/31/2006 4:10:42 AM EDT
Why not just get another barrel that doesn't have the gas port drilled yet? Everyone advertises barrels on the EE from Noveske to CMMG and I am sure one of them would sell you a barrel without the port. May not be the cheapest but certainly would be the safest way to go.

MadDog
Link Posted: 1/31/2006 7:17:25 PM EDT
Singlefire:

Model 1 Sales will sell you a non gas ported bbl if you ask nicely -

http://www.model1sales.com/

Or you could just pull off the FSB & then you have a single port compensator :) That's what I'm doing Thursday.

Gig 'em,

backbencher

PS - Really appreciate what your boys are doing in Iraq & Afghanistan. Thanks again.
Link Posted: 1/31/2006 8:49:54 PM EDT
I would get a piece of rod the same diameter as the gas tube and drill it for the pin.
Link Posted: 2/15/2006 10:34:12 AM EDT
[Last Edit: 2/20/2006 12:35:28 AM EDT by singlefire]
thanks singlefire
Link Posted: 2/15/2006 1:16:09 PM EDT
NP. Glad it worked.
Link Posted: 2/19/2006 4:49:17 AM EDT
[Last Edit: 2/20/2006 8:23:53 AM EDT by target-hunter]
.....
Link Posted: 2/19/2006 4:52:37 AM EDT

Originally Posted By target-hunter:
Very clever - just having the barrel with a gas port in the UK = minimum of 5 years in prison. Well done for posting this in a public forum!



Not true!
Link Posted: 2/19/2006 5:04:49 AM EDT
The first imported Olympic Arms rifles into the UK had either a gas port or a gas tube fitted, but not both

I owned one with the gas tube fitted, nothing illegal until the two go together.
Otherwise a barrel drilled compensator would be illegal..........

The imported rifles, all got batch tested by the Home Office and eventually returned to thier owners in the condition they were imported. Well nearly all, I think a gas key carrier got welded over on one

Since then, I think, every 'new company' marked AR has been pulled for forensic checks!

Those that I know of that are approved are :-

OLYMPIC ARMS
BUSHMASTER
PWA
DPMS
ASA
OBERLAND ARMS

COLT*
(*I know someone who has a US Gov Property marked Colt M16A2 lower ,that was passed Section 1 legal in the UK by the Police / Home Office........ )
Top Top