AR Sponsor
Posted: 11/11/2005 3:10:56 AM EDT
| I have been looking into an after market trigger for my AR and I have run into a snag. They list a large pin and a small pin. I have a DPMS lower and I don't know which pins I have. Can anyone help? Thanks |
| Thanks. That is a big help. I built this rifle for varmet hunting and it will shoot less than a MOA but the creep with the standard trigger is bad. I did the the 15 minute trigger job and the weight is fine. If anyone can tell me how to fix the creep without investing a bunch of money that would be great. |
|
Put the selector on safe (hammer cocked), and tell me how much creep you have in the trigger pull from at rest, until it hits the selector. If it's a great deal, them this creep can be removed by a setscrew (1/4"-28 X 3/8"). As for the trigger creep after this point until hammer release, you would need to stone the hammer sear. |
AR Sponsor