AR Sponsor
Posted: 2/2/2005 5:00:29 PM EDT
|
Finally! Thanks entirely to info off here, I just got done with my first upper build. Everything done from the ground up and IMHO, looks wonderful. Big thanks to ADCO, PRI and Bravo Co, too!!!Heres whats under the hood 18" stainless barrell from White Oak RRA receiver YHM Free Floater YHM Flip up Front ARMS flip up rear OPS Inc FH Little stuff from Bushmaster (gastube, receiver parts, ch) Let me know what you think. Pics are here! |
|
You beat me to it!! Very nice looking. I've got almost the exact same parts list (only on paper right now). I'm looking at getting one of Denny's 16" midlength WOA match barrel/bolt combos. i'm not sure if the YHM FF tube is going to be rifle lengh or midlenght though... $800 is my guess on Cowboy's upper for parts but not including the ops inc. FS. That's probably what, around $140 at ADCO? |
Yes.
Great, now get some ammo and shoot the p!ss out of it.  |
|
It ran me right at 900 I think, including the mags. I could have done 800 or maybe less if I had shopped around a little more and got some deals....but i got in a hurry And yes, other than bolt and barrel, it uses all mil spec parts. And the flash hider or break has to be either .30 or made for a 6.8 I should have some ammo coming in time for next weeked, which is the start of my spring break so i should have my first range report after that! |
| I just finished mine. Looks almost the same, but carbine lenght. I spent a lot of time searching for parts guys bought and didn't use. I've got a 16" heavy stainless barrel.Upper and lower receiver are Rock River Arms From my last Project. I've had some of the parts for more than a year! Total cost was about $600, not counting about $100 for tools. |
AR Sponsor