Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 6/29/2003 7:42:32 PM EDT
I know its been covered before,couldnt find any info from old threads.I have a 14.5 bushy barrel how do I remove the comp,there seems to be what looks like parkerized over circles at the 6 and 12 oclock positions is this where its blind pinned if so How do i remove them,and can a dremel do the job?
Link Posted: 6/29/2003 8:00:57 PM EDT
I would recommend sending it to KKF to remove and replace it with whatever you want,or whatever is legal in your case(Pre-Postban)that way everything comes out nice and pretty and safe.............UNDERDOG
Link Posted: 6/29/2003 8:23:21 PM EDT
Hacksaw.......................[;D]
Link Posted: 6/29/2003 9:28:06 PM EDT
Mine is at Kurt's right now. The best post I saw was where one guy drilled out the pin, then fired a round and the thing tore itself right off. Then two or three people alleged they followed his lead.
Link Posted: 6/30/2003 6:17:06 PM EDT
Hey I posted the same thing mine is the AK brake though from Bushmaster. I tried to remove it myself NO LUCK! I hacked the thing up good also. Now lesson learned its at Kurts getting a pro to do the job right. Install a KKF A3 runs $90 plus $12 or so in return shipping MUCH EASIER THIS WAY! I spoke with Kurt and he turns these brakes off in a lathe, threads and pins weld the KKF A3 on or your choice of brakes or FakeFlash ends. Don't even try it yourself, its a major job IMO. Plus Kurts stuff is the BEST!
Top Top