AR Sponsor
Posted: 3/5/2009 9:48:46 AM EDT
| I notice when I site my laser for 50 yards it's off a mile at 100 or 25 yards because it is mounted on the side of my front site. There becomes an angle problem because the lite is not coming out of the barrel like the bullet is. Anybody have any ideas how to fix that. It looks like where ever you put it that problem does not go away. |
| Would it help if instead of adjusting it so you hit the dot at 50 yards, you set it so you get the drop right, but hit the same distance to the left or right as the laser is from the barrel. In other words, the laser does not angle and cross the path of the bullet, it stays parallel to it. You'd just have to always keep in mind that the point you are going to hit is "x" inches to the left/right of where the dot is. |
|
Quoted:
Would it help if instead of adjusting it so you hit the dot at 50 yards, you set it so you get the drop right, but hit the same distance to the left or right as the laser is from the barrel. In other words, the laser does not angle and cross the path of the bullet, it stays parallel to it. You'd just have to always keep in mind that the point you are going to hit is "x" inches to the left/right of where the dot is. +1 This is how is set mine up, when I mount it on the side. |
AR Sponsor