AR Sponsor
Posted: 8/30/2010 10:59:46 PM EDT
|
was interested in trying a single point sling so i drank the magpul kool aid. i was wondering if it required me to get an ASAP or similar endplate or if the standard mil spec one would work ok. i also have a CTR stock, is there a sling swivel i could attatch to that instead of getting a new end plate or is that only for 2 point?
|
|
you can try running it from the qd swivel on the ctr, but unless its a shorty, your muzzle will spend some time in the dirt. there are quite a few endplates that will work, here's just a few
http://ikickhippies.com/slap/ http://www.danieldefense.com/?page=shop/browse&category=slingmounts_carbineslingmounts http://noveskerifleworks.com/cgi-bin/imcart/display.cgi?item_id=rec-qdep&cat=61&page=1&search=&since=&status= |
|
I run the SLAP and I like it much better than the magpul ASAP + the SLAP doesn't have that annoying rattle noise that is going to give out your position when CQB-ing...
the CTR doesn't close all the way with it, but that doesn't bother me since I'm a big dude and I've never had the necessity to retract it. I KICK HIPPIES - SLAP |
| Can try something like this it just bolts around the bolt. I have the -14 and it works well. The -13 should work but will not be nearly as ambidextrous as the ASP or the SLAP. |
|
Quoted: I use the 13. Not a problem in transition to offside/weak side. Easy to install, only need an Allen wrench.Can try something like this it just bolts around the bolt. I have the -14 and it works well. The -13 should work but will not be nearly as ambidextrous as the ASP or the SLAP. |
|
When I bought my Sully Stock they sent me this one. I run an MS2 sling and never have a problem. I don't really get the ASAP or other types like it. If your sling is adjusted property you should be able to transition from strong side to reactionary slide
GG&G |
AR Sponsor