Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 2/13/2006 1:31:38 PM EDT
How much side to side movement should I expect from a collapsable stock?

Thanks in advanc.
Link Posted: 2/13/2006 7:35:55 PM EDT
depending on what brand you get, my RRA 4 pos CAR stock and my CMT mil-spec 6 pos M4 stock have a little wiggle (m4 a little more than the CAR), but not too much

Link Posted: 2/14/2006 10:22:42 AM EDT
[Last Edit: 2/14/2006 10:23:15 AM EDT by Stickman]
Link Posted: 2/24/2006 7:36:24 PM EDT
So is the wiggle normal then? Cuz I thought mine was a little too much. And what do you use for a heat source. Also, what kind of tool do you crush with. Does this procedure leave marks/ugliness on my beautiful AR?
Link Posted: 2/24/2006 8:08:47 PM EDT

Originally Posted By FirePirate:
So is the wiggle normal then? Cuz I thought mine was a little too much. And what do you use for a heat source. Also, what kind of tool do you crush with. Does this procedure leave marks/ugliness on my beautiful AR?



it is normal to have some play in the stock. I have a $150 Colt M4 stock and it has a good bit of play in it. You could use a hair dryer or heat gun and place it in a vice. I quess you could pad the vice if you wanted. Heat up the stock and then gently close the vice. Just do a little at a time it's easier to do it more than to undo it
Link Posted: 2/25/2006 8:16:54 AM EDT
Top Top