AR Sponsor
Posted: 3/27/2017 5:56:19 PM EDT
| Can the QD mount be reversed so the knob sticks out to the right {more or less over the ejection port}? Looks like it can be simply swapped. |
|
IIRC, I at one point unbolted the base from the riser/mount on my QRP mount and figured out the mounting holes are offset so the base can't be spun to face the other direction.
ETA: The holes aren't offset, but the channel where the riser/mount interface is offset, so you'll end up with the spacer/ring portion overhanging the base quite a bit with a slight offset of the actual sight. You can see in the picture below on this spacer. Attached File |
|
Quoted:
IIRC, I at one point unbolted the base from the riser/mount on my QRP mount and figured out the mounting holes are offset so the base can't be spun to face the other direction. ETA: The holes aren't offset, but the channel where the riser/mount interface is offset, so you'll end up with the spacer/ring portion overhanging the base quite a bit with a slight offset of the actual sight. You can see in the picture below on this spacer. https://www.AR15.Com/media/mediaFiles/294984/IMG-1086-175792.JPG Thanks for the help!! |
AR Sponsor