Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
AR Sponsor
3/10/2010 2:35:10 PM EDT
Does anyone have any experience with this mount? More specifically, does anyone know how high off the rail this will put the ACOG? I ask because I read somewhere that the Larue LT-105 sets it a bit lower than the stock TA60 mount, and I'd prefer that the QD mount I use be put the optic at least at the same height as the stock mount.
3/10/2010 4:59:34 PM EDT
[#1]
From the top of the rail to the center of the optic is 1-3/8". The height from the rail to the bottom of the ACOG is 7/64". No caliper so I just used a tape measure.
3/10/2010 5:21:22 PM EDT
[#2]
Thank you very much, I appreciate it. Do you have the ADM mounted on a gun with a fixed sight? If so, do you find that it (front sight) shows up more when looking through the ACOG? With the TA60 I barely see it, most of the time not at all, I'd like to keep it that way.
3/10/2010 5:32:01 PM EDT
[#3]
Not on my carbine. I run my stock all the way back and with a flip sight the eye relief is too short. So I run the ACOG (3x BTW) w/o a BUIS.
Yes I can see the front sight.
AR Sponsor