AR Sponsor
Posted: 5/21/2007 6:17:35 AM EDT
|
I have a 6.5x20x50 Zeiss with 45 minutes of elevation. The instructions recomend a mount with 20 minutes of cant to utilize a 100 yard zero and maximize range on a .308. I am mounting it on an AR10 T and would like to have a QR mount that will do a good job of returning to zero when removed. I like to remove my scope when cleaning and things get messy. I have looked at the Larue LT158 but it only has 10 minutes built in. Does anyone have another recomendation. It can be something like a swan sleeve and a set of rings. If riser and ring combo is recomended, what ring height for clearance with a 50mm obj. Setup. AR10T 24" barrel FF PRS stock. 175 grain matchking or 180 swift scirrocco loading. |
|
I'd use a PRI or GG&G riser that has 20MOA built into and a set of rings. Since you didn't specify what rings you'll want to go with, it's hard to give a height as all rings are different. If you have a 30MM tube, the other option is to use an Accuracy Internation AR mount with reducers. It has 28MOA built into it and is made for S&B scopes (34mm tubes), so you'll need the reducers. |
AR Sponsor