AR Sponsor
Posted: 5/3/2006 5:13:08 AM EDT
|
I've had this thing for a while and like it quite a bit, it's been a solid sight for me. But the last time I went out blasting I noticed I was consistently missing my target when I switched to irons. I looked at the Troy and saw that it was cranked over to the right almost all the way. Since this was not where it was when it was sighted in I thought that was a bit strange. So I pulled a round out to hold down the small ball/detent thing that holds the wheel in place so I could adjust the sight. The problem is that the ball is not sitting on top of the spring where it should be. It's stuck under one of the holes on the wheel, which means I just have a spring not doing anything to prevent the wheel from spinning. I can turn the windage wheel by hand, there's nothing to lock it in place since the ball is not sitting on top of the spring. Has anybody else ran into this? If so, are there any quick and easy fixes for this? Thanks |
|
Jollyroger, Please email me at [email protected] and we can talk about getting back up and running. Sorry for the inconvenience. v/ Brett |
Kewl! Enough said. No need to bash or trash this thread. Move along... |
|
A BIG +1 and a thank you to Brett and the rest of the folks at Troy Industries!! They got me taken care of and the communication was good through the whole deal. It's service like this that will keep me coming back as a customer as well as spread the word that Troy Industries is a top notch operation. Great products and great customer service. Thanks again!! 
|
Jollyroger, Im glad we could help you out, and if you need anything else please do not hesitate to call or email. v/r Brett |
AR Sponsor