Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 2/5/2006 3:34:35 PM EDT
If you have one, please post the total width of the Reflex sight. I'm researching the idea of having a custom mount made for the PS90 and would like to know if the sight would fit into the frame where the Ring sight is. A site states 1.35" would like to verify it.

I would first mount the sight onto this mount, then attach it to the receiver. I have to measure the width on the weapon as well. My goal is to make the sight's window close to the same height over bore as the stock one. I'm hoping so and that I could access the adjustment screws.

Please keep the thread to the intended question.

Thanks!

Mark
Link Posted: 2/5/2006 6:12:20 PM EDT
Just measured the width of the Trijicon Reflex II that I have on my 870 12ga and it is exactly 1 & 5/16".

Hope this helps,
MadDog

Link Posted: 2/5/2006 6:30:09 PM EDT
MadDog, Thanks alot!
Another question, if you are under cover(covered range or from a structure)with low ambient light and the target is light, any problems seeing the reticle?

Mark
Top Top